1 5

CLOUDVOCAL

AR1 Key Chain Recorder for iSolo System (compatible with iOS devices)

AR1 Key Chain Recorder for iSolo System (compatible with iOS devices)

$168.95 USD
$168.95 USD
Sale Item Sold out
Shipping calculated at checkout.
Exclusively for iSOLO users
* We offer FREE SHIPPING if your iSolo was purchased from PlayProMusic.com or our Amazon shop. (USA and Canada only)
- You should have registered your iSolo System
- Please contact us and provide your invoice number or Amazon order ID; if you don't have it, do not worry; please tell us your name, address and purchase date; our customer service team will be happy to assist you.
- Once we confirm your status, we will send you the free shipping code by email your provided.


The AR1 Key Chain Recorder enables extensive functionality such as digital recording and real-time monitoring. Just connect AR1 to your phone to record or share your content anytime, anywhere. You can also link with various music apps via USB audio to discover endless possibilities in teaching, learning, and creating.



  • Plug & Record: Just plug AR1 into your phone—no more complicated set-up.
  • Amazing Audio Quality: Built-in batteries cut out the noise.
  • Real-Time Monitoring: For a clear, balanced recording during live gigs.

The package includes:
  • AR1 Key chain recorder
  • Carrying case
  • USB-C adapter cable
  • USB-A adapter cable
  • Lightning adapter cable
AR1 Key Chain Recorder

① 1/4” (6.3mm) signal plug Connect to “Output” of all ISOLO receivers
② Power switch ◎Push to Rec side to activate AR1, push to the opposite side to turn off
◎To recharge AR1, use USB power cable while AR1 is OFF
③ 1/8” (3.5mm) audio output Use 1/8” (3.5mm) TRS cable to send signal to speakers or mixers
④ Micro USB port ◎When AR1 is on, this is where you connect your device for recording
◎When AR1 is off, this is the port for recharging
⑤ Headphone volume control Rotate to adjust headphone volume. This WILL NOT change the volume of your recording.
⑥ Headphone output Use 1/8” (3.5mm) TRS cable to connect with your headphones
⑦ Battery status indicator The color will change according to the battery status.
◎Blue: battery > 80%
◎Green: battery between 80%~30%
◎Red: battery less than 30%
⑧ Signal indicator This indicator provides visual aid to adjust your balance.
🟢 or below: Signal is too weak, need to increase ISOLO master volume
🟢🟢 ~ 🟢🟢🟢: Signal is OK! Can adjust a little to your preference.
🔴: Signal is quite strong, need to take care.
🔴🔴🔴: Signal is too strong, need to lower ISOLO master volume to avoid clipping.

AR1 Recorder Specification
Dimensions 105mm(L)*40mm(W)*21mm(H) ±2mm
Weight 46g ± 2g
Power supply Built-in rechargeable battery
Battery life Runs up for 5 hours after a 2-hour complete recharge. Recharge through the USB port.
Audio format 24bit, 48KHz
Signal Input 1/4” (6.3mm) TS jack
Headphone output 1/8” (3.5mm) TRS, maximum output 125mW
Audio output 1/8” (3.5mm) TRS
Compatibility ◎iOS: iOS 12 and above
◎PC & Mac
◎Android: Above Android 9.0 and able to activate OTG
*Since Android is open-source system, compatibility may vary among various models. Cloudvocal DOES NOT guarantee full support to Android devices or Apps.

View full details